{{tag>utilitaire système}}

======Lm-sensors======

=====Introduction=====

Ce mémo décrit la procédure d'installation de ''lm-sensors'', un paquet qui permet de lire les données des capteurs de la carte mère (températures, vitesse de rotation des ventilateurs, tensions).


=====Installation=====

  aptitude install lm-sensors

Détection automatique des sensors: répondre "entrer" tout le temps
  sensors-detect
   [..] enter [..] enter
   [..]
   I will now generate the commands needed to load the required modules.
   Just press ENTER to continue:
   
   To load everything that is needed, add this to /etc/modules:
   
   #----cut here----
   # Chip drivers
   f71805f
   #----cut here----
   
   Do you want to add these lines automatically? (yes/NO)yes

Répondre par "yes" à la dernière question.

(à valider) Charger le(s) module(s) détectés par ''lm-sensors'':
  modprobe f71805f


=====Controle=====

  sensors
   f71805f-isa-0290
   Adapter: ISA adapter
   +3.3V:       +3.31 V  (min =  +0.00 V, max =  +4.03 V)
   Vtt1.2V:     +1.09 V  (min =  +0.00 V, max =  +2.02 V)
   Vram:        +1.42 V  (min =  +0.00 V, max =  +4.03 V)
   Vchip:       +3.45 V  (min =  +0.00 V, max =  +6.31 V)
   +5V:         +5.21 V  (min =  +0.00 V, max = +10.59 V)
   +12V:       +12.23 V  (min =  +0.00 V, max = +22.18 V)
   Vcc1.5V:     +1.11 V  (min =  +0.00 V, max =  +2.02 V)
   Vcore:       +1.10 V  (min =  +0.00 V, max =  +2.02 V)
   5VSB:        +5.21 V  (min =  +0.00 V, max = +10.59 V)
   CPU Fan:    2384 RPM  (min =    0 RPM)
   Sys Fan:       0 RPM  (min =    0 RPM)
   Aux Fan:       0 RPM  (min =    0 RPM)
   CPU Temp:    +22.0°C  (high = +70.0°C, hyst = +69.0°C)  sensor = thermal diode
   Sys Temp:    +20.0°C  (high = +255.0°C, hyst =  +0.0°C)  sensor = thermal diode
   Aux Temp:   +105.0°C  (high = +255.0°C, hyst =  +0.0°C)  sensor = thermistor


=====Liens=====

  * http://www.debian-administration.org/articles/327