utilitaire système
Ce mémo décrit la procédure d'installation de lm-sensors, un paquet qui permet de lire les données des capteurs de la carte mère (températures, vitesse de rotation des ventilateurs, tensions).
aptitude install lm-sensors
Détection automatique des sensors: répondre “entrer” tout le temps
sensors-detect [..] enter [..] enter [..] I will now generate the commands needed to load the required modules. Just press ENTER to continue: To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers f71805f #----cut here---- Do you want to add these lines automatically? (yes/NO)yes
Répondre par “yes” à la dernière question.
(à valider) Charger le(s) module(s) détectés par lm-sensors:
modprobe f71805f
sensors f71805f-isa-0290 Adapter: ISA adapter +3.3V: +3.31 V (min = +0.00 V, max = +4.03 V) Vtt1.2V: +1.09 V (min = +0.00 V, max = +2.02 V) Vram: +1.42 V (min = +0.00 V, max = +4.03 V) Vchip: +3.45 V (min = +0.00 V, max = +6.31 V) +5V: +5.21 V (min = +0.00 V, max = +10.59 V) +12V: +12.23 V (min = +0.00 V, max = +22.18 V) Vcc1.5V: +1.11 V (min = +0.00 V, max = +2.02 V) Vcore: +1.10 V (min = +0.00 V, max = +2.02 V) 5VSB: +5.21 V (min = +0.00 V, max = +10.59 V) CPU Fan: 2384 RPM (min = 0 RPM) Sys Fan: 0 RPM (min = 0 RPM) Aux Fan: 0 RPM (min = 0 RPM) CPU Temp: +22.0°C (high = +70.0°C, hyst = +69.0°C) sensor = thermal diode Sys Temp: +20.0°C (high = +255.0°C, hyst = +0.0°C) sensor = thermal diode Aux Temp: +105.0°C (high = +255.0°C, hyst = +0.0°C) sensor = thermistor